PB Pump

• Use air to drive hydraulic pump. Once the outlet hydraulic pressure reaches the setting pressure, it will stop driving and won't waste any energy.
• If the outlet pressure is reducing, it will supplement pressure automatically to maintain the pressure continuously.
• The outlet pressure of the pump and the pneumatic pressure of driving are as direct ratio. The outlet pressure will base on the adjustment of pneumatic pressure to change.
• The hydraulic pressure (available hydraulic pressure from 4~34.3MPa (40~350kg/cm ²) (570~5000psi), flow rate of pump and circuit control system will base on the requirement to be different.
• The circuit control system has the function of check. If there is no pneumatic pressure, the hydraulic pressure will be maintained.
• The best application is for work clamping systems or hydraulic pressure supply system which needs to maintain pressure for a long time but less operate.
• It has the function of inspection pressure and can be interlocked with the machine.

● Please provide: control voltage, number of pressure switch and number of circuits for "NO" or "NC".

●  Numbers of pump & Non-leak valve depend on control circuits.

● Theψ13 hole for 8v and 6v is located at the bottom and backside.

● Numbers of pump & Non-leak valve depend on control circuits. 

Hot Tags: pb pump, Taiwan pb pump manufacturers, suppliers, factory