Magnetic Clamping

• Magnetic Clamping System

  All steel surface, oil & water proof, and more durable
  35mm super thin and high-strength magnetic design
  Magnetic force 20% more than traditional magnetic plate
  Mold...

  Read More
• Magnetic Clamping Plate

  1. Full metallic surface. High mechanical strength.
  2. Full-metal push button switch, good controllability, safe and stable, more suitable for industrial environment.
  3. Simple-clear...

  Read More
• Electromagnetic Clamping Device

  During the mold change cycle, each piece of mold should be in close position, only can doing MAG operation in mold close condition, this interconnected control operation avoid fake operation due...

  Read More
• Magnetic Plate Clamp

  The electro-permanent magnetic clamping plate/system for quick mold change system is perfectly for 50~4000 Tons injection molding machines.The latest magnetic structure and outstanding design of...

  Read More
• Magnetic Die Clamping

  A lot of manpower and time are wasted when changing the mold on Press machine, which causes the production cost of the factory to increase and also reduces the production efficiency. After using...

  Read More
• Magnetic Mold Clamping System

  The magnetic plate with electric permanent magnetic principle to design & manufacture. It only needs electrical energy at the moment of magnetization and demagnetization, the rest time no need...

  Read More
• Magnetic Platen Injection Molding

  Need be adjusted to let the back base making full contact with magnetic system. Remove the bulgy part, such as the edge of the dent, backplane landing angle extrusion highs, tighten the back plane...

  Read More
• Magnetic Template

  When the mold back plate uneven or cavity, the clamping force of magnetic system will decrease because contact area decrease. HQMC magnetic system in the design process are usually considered...

  Read More
• Electromagnetic Clamp

  As a leading manufacturer of Quick Mold Change System for Injection Molding Machines and Press Machines, SANDSUN’s magnetic mold clamping system significantly enhances the efficiency of mold...

  Read More
• Magnetic Clamping Device

  Use 60T machine’s platen size as an example (left-right 480mm × up-down 46mm),the MIN platen size required is 250mm × 250mm. Because the limit size of the MIN platen is to prevent not enough...

  Read More