Quick Mold Change System

• Air Over Hydraulic Pump

  It is an era for making high frequency mold change with multiple patterns and small quantity. In order to save time for the mold change and ensure the safety of the operation, it is just in time...

  Read More
• Pneumatic Hydraulic Pump

  The hydraulic pump is driven by air. Once the outlet hydraulic pressure reaches the setting pressure, it will stop pumping which won't waste any energy. The pressure would be added automatically...

  Read More
• Hydraulic Pump for Injection Molding Machine

  The non-leak valve won’t leak oil inside and has the function to maintain pressure for a long time for each circuit.
  The premise of the non-leak valve without leakage in the pipe, when...

  Read More
• Power Control Panel

  Adding probably hydraulic oil in oil tank and regularly check the oil tank if there is still enough oil in it.
  The pressure of the air inlet should be reached 5kgf/c㎡.
  Please check if...

  Read More
• Injection Molding Machine Hydraulic Pump

  SANDSUN’s quality control engineer will have a long term pressure test of each batch of product samples for every month to ensure that the quality is good.

  Read More
• Quick Change Mold Clamps

  SANDSUN’s Quick Mold Change System for injection molding machines offer fast, safe, and reliable mold fixing solutions. They significantly reduce downtime and improve changeover efficiency, making...

  Read More
• Mold Clamp

  SANDSUN’s Quick Mold Change System for injection molding machines offer fast, safe, and reliable mold fixing solutions. They significantly reduce downtime and improve changeover efficiency, making...

  Read More
• Check Valve Clamp

  1. Better safety design clamp.
  2. Clamp with Build-in check valve, it can keeps the pressure itself.
  3. The clamp will not release, even if the hydraulic tube is damaged.
  4....

  Read More
• Air Clamp

  1. The tolerance of the template thickness(H) should be within ±3mm.
  2. Do not exceed the capacity of clamp
  3. To maintain the unclamping state, supply air pressure 4kg/cm2 or more to...

  Read More
• Injection Mold Clamps

  * Platen with T-slot and clamps moved automatically by pneumatic cylinder.
  * Another selection of clamping direction: left-right.

  Read More
• Mould Clamp

  CG Clamp features mechanical locking system. The holder of clamp can be shrunk into the clamp when unclamping. It can avoid interference between the holder and mold template.
  It is only...

  Read More