Adding probably hydraulic oil in oil tank and regularly check the oil tank if there is still enough oil in it.
The pressure of the air inlet should be reached 5kgf/c㎡.
Please check if the voltage of input control operation panel and
Send Inquiry
Product Introduction
FAQ for Air Driven Hydraulic Pump Unit
Q: When using the hydraulic pump unit, what's the matter need to pay attention to?
A: 1. Adding probably hydraulic oil in oil tank and regularly check the oil tank if there is still enough oil in it.
2. The pressure of the air inlet should be reached 5kgf/c㎡.
3. Please check if the voltage of input control operation panel and pump unit is correct or not.
4. The pipe should be always kept clean.
5. The air supply of the air driven hydraulic pump unit should be kept dry. It can prevent fur happening and reduce the function of pump and other components.
6. Please change the oil in the oil tank, every two years or when the oil quality is in the bad situation.
Q: What kind of hydraulic oil can be used?
A: Can be used ISO-VG-32 or other similar hydraulic oil.
Q: Can the PA model hydraulic pump be replaced with the PB model hydraulic pump?
A: The PA model hydraulic pump has been stopped production. Due to the upgrade of detailed parts to improve performance, it is replaced by the PB model and the installation locking holes are the same.
Q: Can other pump unit be replaced with SANDSUN's pump unit?
A: Need to provide the information of other brand products to SANDSUN for check, there will be person to help purchase.
Q: When hydraulic pump unit have some problem, what should I do?
A: You can make a phone call or write email to ask, there will be a maintenance service team to serve, or you can send the hydraulic pump unit back to SANDSUN for repair.
