Products

CAA adjustable clamp is an innovative product designed specifically for die plates with U-shaped grooves, offering adjustable clamping to accommodate mold thickness variations from 0 to +20mm.

SANDSUN’s die lifter rails are designed to improve dies change efficiency and operator safety, widely used in quick die change systems for press machines. Available in both hydraulic and spring...

Sandsun provide hydraulic type die lifter and spring type die lifter to meet the customer needs.
Our die lifter provides the ability to position, lift and lower dies in press machines, and...

SANDSUN Spring-Loaded Die Lifter is designed for Quick Die Change System (QDCS). The internal spring mechanism allows the die to move smoothly over the bolster surface, significantly enhancing...

SANDSUN Spring-Loaded Die Lifter is designed for Quick Die Change System (QDCS). The internal spring mechanism allows the die to move smoothly over the bolster surface, significantly enhancing...

SANDSUN’s die lifter rails are engineered to enhance die change efficiency and ensure operator safety, making them an ideal component in quick die change (QDC) systems for press machines.

The Die Arm features a one piece design and allows for ease of use. It can help operators to pull out or push in the die from the press bolster easily.

The arm itself and the support in Model RC can be used separately.
The hanging lengthen(Y) of Model RD should be less than the height between the plate and the ground.

The arm itself and the support in Model RC can be used separately.
The hanging lengthen(Y) of Model RD should be less than the height between the plate and the ground.

Please clearly indicate the above information while ordering.
Adopt D Type to install hole pattern.
Capacity of Model RS is 3000 (KG)/PC

It is an era for making high frequency mold change with multiple patterns and small quantity. In order to save time for the mold change and ensure the safety of the operation, it is just in time...

The hydraulic pump is driven by air. Once the outlet hydraulic pressure reaches the setting pressure, it will stop pumping which won't waste any energy. The pressure would be added automatically...