Products

The non-leak valve won’t leak oil inside and has the function to maintain pressure for a long time for each circuit.
The premise of the non-leak valve without leakage in the pipe, when...

Adding probably hydraulic oil in oil tank and regularly check the oil tank if there is still enough oil in it.
The pressure of the air inlet should be reached 5kgf/c㎡.
Please check if...

SANDSUN’s quality control engineer will have a long term pressure test of each batch of product samples for every month to ensure that the quality is good.

SANDSUN’s Quick Mold Change System for injection molding machines offer fast, safe, and reliable mold fixing solutions. They significantly reduce downtime and improve changeover efficiency, making...

SANDSUN’s Quick Mold Change System for injection molding machines offer fast, safe, and reliable mold fixing solutions. They significantly reduce downtime and improve changeover efficiency, making...

1. Better safety design clamp.
2. Clamp with Build-in check valve, it can keeps the pressure itself.
3. The clamp will not release, even if the hydraulic tube is damaged.
4....

1. The tolerance of the template thickness(H) should be within ±3mm.
2. Do not exceed the capacity of clamp
3. To maintain the unclamping state, supply air pressure 4kg/cm2 or more to...

* Platen with T-slot and clamps moved automatically by pneumatic cylinder.
* Another selection of clamping direction: left-right.

CG Clamp features mechanical locking system. The holder of clamp can be shrunk into the clamp when unclamping. It can avoid interference between the holder and mold template.
It is only...

All steel surface, oil & water proof, and more durable
35mm super thin and high-strength magnetic design
Magnetic force 20% more than traditional magnetic plate
Mold...

1. Full metallic surface. High mechanical strength.
2. Full-metal push button switch, good controllability, safe and stable, more suitable for industrial environment.
3. Simple-clear...

During the mold change cycle, each piece of mold should be in close position, only can doing MAG operation in mold close condition, this interconnected control operation avoid fake operation due...